Range Rover Evoque: Instrument Panel Upper Section

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

3. NOTE: The procedure must be carried out on both sides. Refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

4. Refer to: Steering Column (211-04 Steering Column, Removal and Installation).

5. Refer to: Floor Console Upper Section (501-12 Instrument Panel and Console, Removal and Installation).

6. Refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation).

7. NOTES:

The step must be carried out on both sides.

LH illustration shown, RH is similar.

Torque:

Screw 17mm 1.9 Nm
Screw 13mm 1.1 Nm

8.

9. Torque: 1 Nm

10.

11. Torque: 1.5 Nm

12. CAUTION: Take extra care not to damage the instrument cluster face.

13.

14. Torque: 6 Nm

15.

16. CAUTION: Care must be taken to avoid damage to the internal components of the center registers.

Torque: 1.5 Nm

17. Torque: 1.5 Nm

18.

19.

20. Torque: 6 Nm

21. CAUTION: Protect the surrounding trim to avoid damage.

NOTE: With assistance remove the component.

Torque: 6 Nm

Installation

1. To install, reverse the removal procedure.

READ NEXT: