Range Rover Evoque: Anti-theft system

additions should No modifications or additions should be made to the anti-theft system. Such changes could cause the system to malfunction.

READ NEXT:

 Airbag system

The components that make up the airbag system are sensitive to electrical or physical interference, either of which could easily damage the system and cause inadvertent operation or a malfunct

 Disability modifications

Occupants with disabilities which may require modification of the vehicle, must contact a Dealer/Authorised Repairer before any modifications are made.

 Parts and accessories

The fitting of non-approved parts and accessories, or the carrying out of non-approved alterations or conversions, may be dangerous and could affect the safety of the vehicle and occupants and

SEE MORE:

 Topping up the coolant

Never remove the filler cap when the engine is hot - escaping steam or scalding water could cause serious personal injury. Antifreeze is highly inflammable. Do not allow antifreeze to come into contact with naked flames or other sources of ignition (e.g. a hot engine) - a fire may result.

 A-Pillar Outer Panel

Removal NOTES: The A-pillar outer panel is manufactured from mild steel. The fender mounting bracket is serviced on the new panel. The upper and lower butt joint must be MIG brazed due to the location of a boron reinforcement. A new anti tamper VIN indentification decal will be required when rep

© 2011-2026 Copyright www.rrevoque.org