Range Rover Evoque: Control Diagram
NOTES:
A = Hardwired; N = Medium Speed CAN (controller area network) bus; D =
High Speed CAN bus; T = Coaxial; O =
LIN (local interconnect network) bus; P = Fibre Optic MOST; AD = NSTC; AE = LVDS;
Park assist is not available to all markets.
CONTROL DIAGRAM - SHEET 1 OF 3 - PARKING AID AND PARK ASSIST

- TCM (transmission control module)
- CJB (central junction box)
- Integrated Control Panel (ICP)
- Integrated Audio Module (IAM)
- ABS (anti-lock brake system) module
- Audio power amplifier (Hi-Line only)
- Battery
- BJB (battery junction box)
- LH (left-hand) side parking aid sensor
- LH front outer parking aid sensor
- LH front inner parking aid sensor
- RH (right-hand) front inner parking aid sensor
- RH front outer parking aid sensor
- RHside parking aid sensor
- Electric power assisted steering rack
- Park distance control module
- RH rear outer parking aid sensor
- RH rear inner parking aid sensor
- LH rear inner parking aid sensor
- LH rear outer parking aid sensor
- RJB (rear junction box)
- Instrument cluster
- Wheel speed sensors
- Front audio speakers
- Rear audio speakers
CONTROL DIAGRAM - SHEET 2 OF 3 - REAR VIEW CAMERA SYSTEM (LOW-LINE)

- Battery
- BJB
- CJB
- Touch Screen Display (TSD)
- Rear view camera
CONTROL DIAGRAM - SHEET 3 OF 3 - PROXIMITY CAMERA SYSTEM (HI-LINE)

- Battery
- BJB
- RJB
- Front bumper camera
- Front bumper camera
- Proximity camera control module
- Mirror camera
- Mirror camera
- Rear view camera
- Touch Screen Display (TSD)
- CJB
READ NEXT:
PRINCIPLES OF OPERATION - PARKING AID
Vehicles Fitted With Automatic Transmission
If reverse ) is the first gear selected after the ignition is switched on,
both the front (if fitted) and rear parkin
Parking Aid Module
The parking aid module is located on the LH side of the luggage compartment,
behind the 'C' pillar trim panel.
The parking aid module has three connectors which provide for power
Removal
CAUTION: LH illustration shown, RH is similar.
NOTES:
Removal steps in this procedure may contain installation details.
The ignition must be switched off.
1. WARNING: Make sure to support th
SEE MORE:
When locking the vehicle with the Smart Key, if
one or more of the doors, the bonnet or the
tailgate is not fully closed, or the ignition is ON,
the vehicle will NOT lock and there will be an
audible mislock error warning. The hazard
warning lamps will NOT flash and the door
mirrors (if enable
Capacities
Fuel System Pressure Release GTDi
2.0L Petrol
Draining
1. Refer to: Petrol and Petrol-Ethanol Fuel Systems Health and Safety
Precautions (100-00 General Information, Description and
Operation).
2. Remove the fuel pump fuse.
3. Remove the fuel filler cap.
4. Start the engine and allow it
© 2011-2026 Copyright www.rrevoque.org
