Range Rover Evoque: Grass-gravel-snow

This program should be used

This program should be used where a firm surface is covered with loose or slippery material.

Note: For deep snow it is recommended that the Sand program is selected.

Note: If the vehicle is unable to gain traction in deep snow, switching DSC off may help. DSC should be switched on again, as soon as the difficulty is overcome.

READ NEXT:

 Mud-ruts

This program should be used for crossing terrain that is muddy, rutted, soft or uneven. HDC is automatically selected with this program.

 Sand

This program should be used for terrain which is predominantly soft dry sand or deep gravel. Note: If the vehicle is unable to gain traction in extremely soft, dry sand, switching DSC off may h

 Wading

The maximum advisable wading depth is 500mm (19.7in). If the vehicle remains stationary in water above the door sill level, severe electrical damage may occur. Do not switch off the engine when

SEE MORE:

 Electronic Engine Controls

Principles of Operation For a detailed description of the 2.0L GTDi petrol electronic engine controls, refer to the relevant Description and Operation section in the workshop manual. REFER to: (303-14B Electronic Engine Controls - GTDi 2.0L Petrol) Inspection and Verification CAUTION: Diagnosis by

 Seats - System Operation and Component Description

Control Diagram NOTE: A = Hardwired; N = Medium speed CAN (controller area network) bus; O = LIN (local interconnect network) bus CONTROL DIAGRAM - FRONT POWER OPERATED NON-MEMORY SEATS Driver seat forward-rearward motor Driver seat recline motor Driver seat height motor Driver lumbar pump D

© 2011-2026 Copyright www.rrevoque.org