Range Rover Evoque: Brake systems (amber)
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Warning lamps / Brake systems (amber)
Brake systems (amber)
Illuminates briefly when the ignition is switched on. If the lamp illuminates after starting the engine or while driving, suspect worn brake pads or a fault with the Emergency Brake Assist (EBA) system. The vehicle can still be driven with care, but avoid heavy brake application.
Seek qualified assistance urgently.
READ NEXT:
Dynamic stability control (amber)
Dynamic stability control (amber)
Illuminates briefly when the
ignition is switched on and
extinguishes when the engine is
started. If the lamp flashes while driving, the
DSC system is active.
Dynamic stability control off (amber)
Dynamic stability control off (amber)
Illuminates when DSC is switched
off.
Deactivating DSC also reduces the
level of Electronic Traction Control intervention
and may lead to an increase in wh
Anti-lock braking system (amber)
Anti-lock braking system (amber)
Illuminates briefly when the
ignition is switched on. If the lamp
remains on or illuminates while
driving, there is a fault with the ABS system.
Drive with care
SEE MORE:
Automatic transmission
The rotary drive selector rotates in either
direction. At engine start up, the selector
elevates out of its parked position.
1. To select D (Drive) or R (Reverse) gear,
apply the foot brake then rotate the drive
selector. The related LED by the selector
will illuminate.
Note: If pressure is
High beam assist
This feature of the Xenon lighting automatically
selects and deselects high beam, under
specific conditions of road lighting and in the
absence of other vehicle’s lights. The system is
only active when the ambient light drops below
a predetermined level.
Note: It is not recommended that high
© 2011-2026 Copyright www.rrevoque.org
