Component Location
COMPONENT LOCATION (GTDI)
COMPONENT LOCATION (DW12)
Control Components AWD - Overview
OVERVIEW
The climate control system incorporates the heating, ventilation and A/C (air conditioning) systems. There are 2 main types of climate control system available:
The climate control functions for both systems are controlled by the ATC (automatic temperature control) module. The ATC module is mounted in the center console and contains both the system electronic software and user controls.
The ATC module works in conjunction with a number of other vehicle control modules, including the ECM (engine control module), which controls a number of climate control sub-systems on receipt of requests from the ATC module.
The dual zone climate control system features automatic control of air temperature, air distribution and blower motor speed. The ATC module is also able to control individual temperature requests for both the driver and passenger side of the cabin.
NOTE: The ATC module can only maintain a maximum temperature difference
between the 2 sides of the cabin of up
to approximately 3READ NEXT:
Control Diagram
NOTE: A = Hardwired; D = High Speed CAN (controller area network) bus; N =
Medium Speed CAN bus; O = LIN
(local interconnect network) bus
DW12C is shown, GTDi is similar
Battery
B
Control Diagram, System Operation
ATC MODULE
NOTE: The 'ECON' button has been renamed 'A/C' to prevent confusion with
the Stop/Start system 'Eco' switch.
The ATC module is mounted in the center console and is integral with the
cont
Component Description
SEE MORE:
The fuel consumption figures shown below have been calculated using a
standard testing
procedure (the new EC test procedure from Directive 99/100/EC), and produced in
accordance with
The Passenger Car Fuel Consumption (Amendment) Order 1996.
Under normal use, a vehicle’s actual fuel consump
Fuel consumption
Daytime running lamps are LED lamps.
With the lighting control in the OFF position or
in AUTO position while lighting conditions do
not require headlamps on, then daytime
running lamps will switch on automatically
under the following conditions:
- The engine is running.
- The gear selector is
Daytime running lamps