Range Rover Evoque: Instrument Panel TD4 2.2L Diesel

Removal

NOTE: Removal steps in this procedure may contain installation details.

All vehicles

1. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

2. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

3. NOTE: The procedure must be carried out on both sides. Refer to: Cowl Side Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

4. Refer to: Steering Column (211-04 Steering Column, Removal and Installation).

5. Refer to: Windshield Wiper Motor (501-16 Wipers and Washers, Removal and Installation).

6. Refer to: Thermostatic Expansion Valve - TD4 2.2L Diesel (412-01 Climate Control, Removal and Installation).

7. NOTE: The procedure must be carried out on both sides. Refer to: Front Door (501-03 Body Closures, Removal and Installation).

8. Refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation).

9. Refer to: Front Seat (501-10 Seating, Removal and Installation).

10. Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).

Vehicles with manual transmission

11. Refer to: Gearshift Lever (308-06 Manual Transmission/Transaxle External Controls, Removal and Installation).

Vehicles with automatic transmission

12.

All vehicles

13. NOTE: The step must be carried out on both sides.

Torque: 6 Nm

14. NOTE: The step must be carried out on both sides.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25. CAUTION: Make sure that all openings are sealed.

Use new blanking caps.

Clamp the hoses to minimize coolant loss.

26. Torque: 24 Nm

27. Torque: 24 Nm

28. NOTES:

Right-hand shown, left-hand similar.

The step must be carried out on both sides.

Torque: 24 Nm

29. NOTES:

Right-hand shown, left-hand similar.

The step must be carried out on both sides.

Torque: 40 Nm

30. CAUTION: Protect the surrounding trim to avoid damage.

NOTE: With assistance remove the component.

Torque: 24 Nm

Installation

1. To install, reverse the removal procedure.

2. Check and top-up the coolant if required.

READ NEXT: