Range Rover Evoque: Tyre pressure monitoring (yellow)

Tyre pressure monitoring (yellow)
Tyre pressure monitoring (yellow)

Illuminates briefly when the ignition is switched on. If the lamp remains on or illuminates while driving, one or more tyres are significantly under-inflated. Stop the vehicle as soon as possible, check the tyre pressures and inflate to the recommended pressure.

READ NEXT:

 Hill descent control (green)

Hill descent control (green) Illuminates when HDC is selected and HDC operating conditions are met. If the lamp flashes, HDC has been selected, but the operating conditions are not being met (e

 Cruise control active (green)

Cruise control active (green) Illuminates when cruise control is active.

 Side lamps (green)

Side lamps (green) Illuminates when the side lights are switched on.

SEE MORE:

  Rear Bumper Mounting

Removal NOTE: The rear bumper mounting is manufactured from mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The rear bumper mounting is replaced in conjunction with: Rear bumper cover Rear bumper Back panel 3.

  Back Panel

Removal NOTES: The back panel is manufactured from mild steel, it includes the bumper retaining bracket. It is necessary to remove a section of both rear lamp mounting panels to enable removal and installation of the back panel. 1. The back panel is replaced in conjunction with: Rear bumper cov

© 2011-2026 Copyright www.rrevoque.org - 0.0045