Range Rover Evoque: Vehicle information and settings menu
Vehicle information and settings menu
A number of vehicle features and display settings may be configured via the vehicle information and settings menu.
To display and navigate through the vehicle information and settings menu, operate the menu control on the steering wheel.
1. Steering wheel menu control.
- Press the up/down arrows to scroll through a list. The current selection will be highlighted.
- Press the right arrow to view a sub list.
- Press the left arrow to return to the previous menu.
- Press the OK button to select the highlighted item.
2. Select to close or return to main menu.
3. Select to view all active warning messages.
4. Select to access the Vehicle Set-up menu.The following features can be personalised:
Before making any changes to
the
vehicle set-up, you must ensure
that you have read and fully
understood the relevant sections
of the handbook. Failure to do so
could lead to serious injury or
death.
- Blind spot monitor.
- Speed warning.
- High beam assist.
- Passenger airbag.
- Alarm sensors.
- Cruise Eco data - Reverse-dip mirrors.
- Easy entry/exit.
- 2-stage locking.
- Audible lock warning - Winter wiper park.
- Drive-away locking.
- Headlamp delay.
5. Select to access the Trip Computer menu.
6. Select to access the Display Settings menu.The following features can be personalised: - Language for message centre display.
- Temperature units.
- Appearance of the instrument panel.
7. Select to access the vehicle Service Menu.
Can be accessed only when the engine is not running.
Note: Some personalisation options may not be available in all markets.
READ NEXT:
Warning and information messages
Do not ignore warning
messages.Take
appropriate action and, when
necessary, seek qualified assistance
before driving the vehicle.
If more than one message is active, each is
displayed in turn
Trip computer
The computer memory stores data for a
journey or series of journeys until it is reset to
zero.
The displayed information is for guidance only,
as it can be affected by traffic, road and
weather c
SEE MORE:
Component Description
ATC MODULE
NOTE: The 'ECON' button has been renamed 'A/C' to prevent confusion with
the Stop/Start system 'Eco' switch.
The ATC module is mounted in the center console and is integral with the
control panel. The module works in conjunction
with the ECM to control all aspects of heating, ventilati
Emission control system
Land Rover vehicles are fitted with emission
and evaporative control systems. In many
countries it is unlawful to tamper, modify or
replace such equipment and legal penalties
apply if the laws are flouted.
Land Rover Dealers/Authorised Repairers are
properly equipped to perform repairs and to
