Range Rover Evoque manuals

Range Rover Evoque: Changing a road wheel

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Wheel changing / Changing a road wheel

Changing a road wheel
Changing a road wheel

1. Temporary spare wheel locking ring.

2. Temporary spare wheel retaining bolt.

3. Tool kit retaining bolt.

4. Jack.

5. Wheel brace.

should be After use, the tool kit should be returned to the under floor storage area and correctly stowed.
The spare wheel is heavy and if handled incorrectly may cause injury.
Use extreme caution when lifting or manoeuvring the wheels.
Always secure the spare wheel, or the removed wheel, in the correct position using the retaining bolt.

Always remove the temporary spare wheel before jacking the vehicle.

Note: Examine the jack occasionally, clean and grease the moving parts, particularly the screw thread, to prevent corrosion.

READ NEXT:

 Removing the temporary spare wheel

Remove the spare wheel prior to jacking the vehicle, to avoid destabilising the vehicle when raised. Do not use power tools to loosen the spare wheel. Doing so may damage the mechanism. 1.

 Temporary spare wheel

Always adhere to the instructions given on the temporary use spare wheel warning label. Failure to comply can be dangerous. When a temporary use spare wheel is fitted, drive with caution and r

 Using wheel chocks

Note: Wheel chocks are not supplied as part of the tool kit. Wheel chocks are a useful addition to a vehicle tool kit. Note the following advice when using wheel chocks. Before raising the vehic

SEE MORE:

 Diesel particulate filter (DPF)

Diesel vehicles equipped with a particulate filter have more efficient emission control. The particles in the exhaust gases are collected in the filter during normal driving. When a DPF message is displayed, the filter requires a regeneration cycle to clean itself. This requires the engine to

 Driveshaft

Torque Specifications Driveshaft TD4 2.2L Diesel, Vehicles Without: Diesel Particulate Filter (DPF) Removal 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Refer to: Exhaust System (309-00B, Removal and Installation). 3. CAUTIONS: Mark the position o

© 2011-2025 Copyright www.rrevoque.org