Range Rover Evoque: Temporary spare wheel

instructions Always adhere to the instructions given on the temporary use spare wheel warning label. Failure to comply can be dangerous.
When a temporary use spare wheel is fitted, drive with caution and replace with the specified wheel and tyre as soon as possible.
Do not fit more than one temporary use spare wheel and tyre assembly at one time.
The temporary use spare wheel must be inflated to 4.2 bar (60 psi, 420 kPa) and cannot be repaired.
Temporary use spare wheel, maximum speed is 80 km/h (50 mph).
DSC must be switched on while the temporary spare wheel is in use.
Traction devices such as snow chains cannot be used with a temporary spare wheel.

READ NEXT:

 Using wheel chocks

Note: Wheel chocks are not supplied as part of the tool kit. Wheel chocks are a useful addition to a vehicle tool kit. Note the following advice when using wheel chocks. Before raising the vehic

 Wheel changing safety

Before raising the vehicle or changing a wheel, ensure that you read and comply with the following warnings. Always find a safe place to stop, off the highway and away from traffic. Ensure tha

 Locking wheel nuts

Locking wheel nuts can be removed only by using the special adapter provided in the tool kit. Note: When the vehicle is first supplied, the adapter may be stored in the glove compartment. It shou

SEE MORE:

 Steering Column

Steering Column - Component Location Upper column Steering wheel Intermediate shaft Steering Column - Overview The steering column consists of an intermediate shaft, the upper column and the steering wheel, which are connected together to transfer driver steering inputs to the steering gear.

 Rear Suspension FWD

Component Location Stabilizer link RH (right-hand) spring and damper assembly Stabilizer bar LH (left-hand) spring and damper assembly Wheel knuckle Stub axle and locknut Hub Longitudinal link Rear transverse link Front transverse link Front Wheel Drive (FWD) Rear Subframe Overview The

© 2011-2025 Copyright www.rrevoque.org