Range Rover Evoque: Switching off the engine

Before switching off the engine, ensure that the vehicle is parked safely with the park brake applied.

1. Select P for automatic transmission, or neutral for manual transmissions.

Note: If any other gear is selected at switch off, the rotary selector will automatically move to P before retracting into the centre console.

2. Press the START/STOP button.

Note: The park brake will apply automatically if it has not already been applied.

READ NEXT:

 Switching off the engine with the vehicle moving

It is not advisable to switch off the engine while the vehicle is moving. However, should such a situation arise, then the following procedure applies. - Press and hold the engine START/STOP

 Rolling re-start

If the engine is switched off while the vehicle is moving, a rolling re-start can be initiated. Automatic transmission - select neutral (N) and then press the engine START/STOP button. When the en

 Keyless start backup

If the vehicle has been unlocked using the emergency key blade or the Smart Key is not detected by the vehicle, it will be necessary to use the keyless start backup to disarm the alarm and start t

SEE MORE:

 Using traction devices

Only use traction devices in heavy snow conditions, on hard road surfaces. Dynamic Stability Control (DSC) must be switched off when using traction devices. Never exceed 50 km/h (30 mph) when traction devices are fitted. Never fit traction devices to a temporary use spare wheel. Land Ro

 Auxiliary power sockets

Auxiliary power sockets Only use Land Rover approved accessories. Using any other equipment may damage the vehicle's electrical system and/or cause battery discharge. If you are in any doubt contact a Land Rover Dealer/Authorised Repairer. The engine should be running when using accessori

© 2011-2025 Copyright www.rrevoque.org