Range Rover Evoque: Headlamp courtesy delay

This feature operates whenever the lamps master switch is in the AUTO (5) position and the ignition is turned off. The headlamps will remain illuminated for up to 240 seconds.

Note: The time delay may be changed via the Vehicle settings menu. See 56, VEHICLE INFORMATION AND SETTINGS MENU.

Courtesy lamps can be switched off at any time by pressing the headlamps button on the Smart Key.

READ NEXT:

 High beam assist

This feature of the Xenon lighting automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only acti

 Auto lamps windscreen wiper detection

If Auto lamps is selected and the windscreen wipers are switched on for 20 seconds or more, the side lamps, tail lamps and headlamps will switch on automatically. When the wipers are switched off,

 Condensation

Misting of lamp lenses can occur under some atmospheric conditions. This will not affect the performance of the lamps and will clear during normal operation.

SEE MORE:

 Front Bumper Mounting

Removal NOTE: The front bumper mounting is manufactured from HSLA300 and mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The front bumper mounting is replaced in conjunction with: Front bumper cover Front bumper

 Steering Gear

Special Tool(s) 205-754A Splitter, Ball Joints 502-012 Alignment Pins, Subframe General Equipment Transmission jack Removal CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. NOTES: Removal steps in this procedure may contain installation details. LHD il

© 2011-2025 Copyright www.rrevoque.org