Range Rover Evoque: Hill descent control (green)
![Hill descent control (green)](images/books/2524/2/index.27.gif)
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e.g. vehicle speed is too high) or
HDC fade-out is occurring.
READ NEXT:
Cruise control active (green)
Illuminates when cruise control is
active.
Side lamps (green)
Illuminates when the side lights are
switched on.
Front fog lamps (green)
Illuminates when the front fog
lamps are switched on.
SEE MORE:
General Specification
Torque Specifications
* New nuts/bolts must be installed
Brake Pads
Removal
WARNING: Brake pads must be renewed in axle sets only. Failure to follow
this instruction may result in braking
efficiency being impaired.
CAUTION: LH illustration shown, RH is similar.
1. Connect th
The rotary drive selector rotates in either
direction. At engine start up, the selector
elevates out of its parked position.
1. To select D (Drive) or R (Reverse) gear,
apply the foot brake then rotate the drive
selector. The related LED by the selector
will illuminate.
Note: If pressure is
© 2011-2024 Copyright www.rrevoque.org
![](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAEALAAAAAABAAEAAAIBTAA7)