Range Rover Evoque manuals

Range Rover Evoque: Rear Door Trim Panel

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Body and Paint / Interior Trim and Ornamentation / Rear Door Trim Panel

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Torque: 1.3 Nm

Range Rover Evoque. Interior Trim and Ornamentation

2. Torque: 6 Nm

Range Rover Evoque. Interior Trim and Ornamentation

3. Torque: 6 Nm

Range Rover Evoque. Interior Trim and Ornamentation

4.

Range Rover Evoque. Interior Trim and Ornamentation

5.

Range Rover Evoque. Interior Trim and Ornamentation

6.

Range Rover Evoque. Interior Trim and Ornamentation

7. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Interior Trim and Ornamentation

8. Torque: 0.6 Nm

Range Rover Evoque. Interior Trim and Ornamentation

9.

Range Rover Evoque. Interior Trim and Ornamentation

10. Torque: 1 Nm

Range Rover Evoque. Interior Trim and Ornamentation

11.

Range Rover Evoque. Interior Trim and Ornamentation

Installation

1. To install, reverse the removal procedure.

Liftgate Trim Panel

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. NOTE: Make sure the two metal clips are removed from the liftgate.

Range Rover Evoque. Interior Trim and Ornamentation

3. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Interior Trim and Ornamentation

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Headliner

Removal NOTES: Removal steps in this procedure may contain installation details. Vehicles with glass roof panel shown, vehicles without glass roof panel similar. All vehicles 1. Refer to: Windshield

 Engine Cover GTDi 2.0L Petrol, Engine Cover TD4 2.2L Diesel

Engine Cover GTDi 2.0L Petrol Removal NOTE: Removal steps in this procedure may contain installation details. 1. 2. NOTE: Do not disassemble further if the component is removed for access only. Inst

 Loadspace Trim Panel

CAUTION: LH illustration shown, RH is similar. NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. 2. 3. 4. Torque: 1.4 Nm 5. Torque: 20 Nm 6. NOTE: LH side o

SEE MORE:

 B-Pillar Reinforcement

Removal NOTES: The B-Pillar reinforcement is manufactured from boron steel. The B-Pillar reinforcement is unpicked from the side panel reinforcement, 'ring-frame', it is not serviced separately. There are 2 NVH components serviced on the new B-Pillar reinforcement. 1. The B-Pillar reinforcement i

 Passenger Seat Cushion Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General In

© 2011-2025 Copyright www.rrevoque.org