Range Rover Evoque: Touch screen remote control

Touch screen remote control
Touch screen remote control

1. Press here to undock remote control.

screen to Do not press the touch screen to undock the remote control.

2. Touch screen.

3. Home screen.

4. Video source select.

5. Audio source select.

6. Right screen select.

7. Right screen tell-tale. (illuminates when right screen has been selected).

8. Cursor movement and option select buttons.

9. Left screen tell-tale. (illuminates when left screen has been selected).

10. Left screen select.

11. Screen brightness - decrease.

12. Screen brightness - increase.

13. RSE settings.

READ NEXT:

 Using the system

The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote (1) to unlatch it. Do not attempt to pull the remote control ou

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

SEE MORE:

 Power Liftgate Switch, Liftgate

Power Liftgate Switch Removal NOTE: Removal steps in this procedure may contain installation details. 1. 2. Torque: 4 Nm 3. Torque: 4 Nm 4. Installation 1. To install, reverse the removal procedure. Liftgate Removal CAUTION: The headliner must be lowered as a complete unit to gain access to the

 Wiper blade replacement

Fit only replacement wiper blades that are identical to the original specification. Before changing a wiper blade, the wiper arms must be set in the ‘service’ position as follows; Note: The Smart Key must remain in the vehicle while wiper blades are replaced. 1. Ensure that the ignition is

© 2011-2025 Copyright www.rrevoque.org