Range Rover Evoque manuals

Range Rover Evoque: Keyless entry

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Entering the vehicle / Keyless entry

Keyless entry allows the vehicle to be opened if a Smart Key is within 1.0m (3ft) of the door handle or the tailgate external switch.

is placed within a metal container or if it The Smart Key may not be detected if it is placed within a metal container or if it is shielded by a device with a back-lit LCD screen, such as a smart phone, laptop (including laptop bag), games console etc. Keep the Smart Key clear of such devices when attempting Keyless entry or Keyless starting.

Note: The Smart Key needs only to be on the driver’s person or in a non-metallic bag or briefcase. It does not need to be exposed or handled.

When keyless entry operates, the alarm will be disarmed and the doors unlocked according to the current unlock/entry setting (Single or Multi-Point). The hazard warning lamps will flash twice as ‘unlock’ confirmation. Power folded mirrors will fold out (if enabled).

Note: If Single Point Entry is the current security setting and a door other than the driver’s door is opened first, all doors will unlock.

READ NEXT:

 Smart key check

If the ignition is on or the engine is running and there is no Smart Key inside the vehicle when the last door is closed, the message Smart Key Not Found Refer to Handbook will be displayed in the

 Disarming if the smart key and keyless entry fail to work

The vehicle can still be unlocked and the alarm disabled. To unlock the vehicle: 1. Unlock the left side front door using the key blade. The alarm will be triggered. 2. Position the Smart Key agai

 Deactivating the alarm when triggered

If the alarm has been triggered, it can be deactivated by any one of the following methods: - Pressing the unlock button on the Smart Key. - Opening a door using keyless entry. - Positioning a v

SEE MORE:

 Conditions preventing automatic engine stop

The engine will not automatically stop if:<> - the external temperature is below approximately 0°C (32°F) - the external temperature is above approximately40°C (104°F) - engine has not reached operating temperature - driver’s seat belt is not fastened - driver’s door is not fully

 Torque Converter Seal GTDi 2.0L Petrol

Special Tool(s) 307-597 Installer, Torque Converter Seal 307-613 Holding Pins, Torque Converter Removal NOTE: Some variation in the illustrations may occur, but the essential information is always correct. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

© 2011-2023 Copyright www.rrevoque.org