Range Rover Evoque: Flat spots due to long term parking

In order to minimise flat spotting, the tyre pressures can be increased to the maximum as stated on the tyre sidewall, for the period when the vehicle is stationary. Tyres must be returned to the specified running pressures before driving.

READ NEXT:

 Age degradation

Tyres degrade over time due to the effects of ultraviolet light, extreme temperatures, high loads, and environmental conditions. It is recommended that tyres are replaced at least every six years,

 Winter tyres

In many countries legislation exists that requires the use of winter tyres during specified periods of the year. M+S tyres have a recognised level of winter performance and need not be replaced.

 Using traction devices

Only use traction devices in heavy snow conditions, on hard road surfaces. Dynamic Stability Control (DSC) must be switched off when using traction devices. Never exceed 50 km/h (30 mph) when

SEE MORE:

 Rear Lamp Mounting Panel

Removal NOTES: The rear lamp mounting panel is manufactured from mild steel. The section of the rear lamp mounting panel described within this procedure is for the access for installation of the inner back panel assembly. The upper NVH component must be replaced when a complete panel is installed

 Power Steering FWD

Component Location Steering gear Rubber seal assembly Heat shield Overview The vehicle is fitted with EPS (electric power steering), provided by a ZF Servolectric steering gear unit with variable ratio, rack and pinion steering and speed sensitive power assistance. Power assistance is from a

© 2011-2025 Copyright www.rrevoque.org