Range Rover Evoque: Hill descent control (green)

Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e.g. vehicle speed is too high) or
HDC fade-out is occurring.
READ NEXT:
Cruise control active (green)
Illuminates when cruise control is
active.
Side lamps (green)
Illuminates when the side lights are
switched on.
Front fog lamps (green)
Illuminates when the front fog
lamps are switched on.
SEE MORE:
Removal
NOTES:
Some variation in the illustrations may occur, but the essential
information is always correct.
Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the front wheels
EPB will be applied automatically if the ignition
is switched off and the vehicle speed is below
3km/h (2mph).
To prevent automatic operation, when the
vehicle is stationary, press and hold the EPB
switch in the release position. Within 5
seconds, switch off the ignition and continue to
hold
© 2011-2025 Copyright www.rrevoque.org
