Range Rover Evoque manuals

Range Rover Evoque: Parking Aid - Component Location

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Instrumentation and Warning Systems / Parking Aid / Parking Aid - Component Location

NOTE: Park assist is not available to all markets.

COMPONENT LOCATION - SHEET 1 OF 4 - PARKING AID AND PARK ASSIST

Range Rover Evoque. Parking Aid

  1. TCM (transmission control module)
  2. CJB (central junction box)
  3. Touch Screen Display (TSD)
  4. Integrated Audio Module (IAM)
  5. ABS (anti-lock brake system) module
  6. Audio power amplifier (Hi-Line only)
  7. Battery
  8. BJB (battery junction box)
  9. LH (left-hand) front slot detect parking aid sensor
  10. LH front outer parking aid sensor
  11. LH front inner parking aid sensor
  12. RH (right-hand) front inner parking aid sensor
  13. RH front outer parking aid sensor
  14. RH front slot detect parking aid sensor
  15. Electric power assisted steering rack

COMPONENT LOCATION - SHEET 2 OF 4 - PARKING AID AND PARK ASSIST

Range Rover Evoque. Parking Aid

  1. Park distance control module
  2. RH rear outer parking aid sensor
  3. RH rear inner parking aid sensor
  4. LH rear inner parking aid sensor
  5. LH rear outer parking aid sensor
  6. RJB (rear junction box)

COMPONENT LOCATION - SHEET 3 OF 4 - REAR VIEW CAMERA SYSTEM (LOW-LINE)

Range Rover Evoque. Parking Aid

  1. CJB
  2. Touch Screen Display (TSD)
  3. Rear view camera
  4. BJB
  5. Battery

COMPONENT LOCATION - SHEET 4 OF 4 - PROXIMITY CAMERA SYSTEM (HI-LINE)

Range Rover Evoque. Parking Aid

  1. CJB
  2. RH mirror camera
  3. Touch Screen Display (TSD)
  4. Rear view camera
  5. RJB
  6. LH mirror camera
  7. Proximity camera control module
  8. BJB
  9. LH front bumper camera
  10. Battery
  11. RH front bumper camera

READ NEXT:

 Parking Aid - Overview

OVERVIEW The parking aid system provides an audible warning to the driver when any obstacles are in the path of the vehicle during forward or reverse parking maneuvers. The system consists of four ul

 Parking Aid - System Operation and Component Description

 Control Diagram

NOTES: A = Hardwired; N = Medium Speed CAN (controller area network) bus; D = High Speed CAN bus; T = Coaxial; O = LIN (local interconnect network) bus; P = Fibre Optic MOST; AD = NSTC; AE = LVDS; Pa

SEE MORE:

 Oil check preparation

Prior to checking the oil level ensure that: - The vehicle is on level ground. - The engine oil is cold. Note: If it is necessary to check the oil level when the engine is hot, switch off the engine and let the vehicle stand for 5 minutes to allow the oil to drain back into the sump. Do not st

 Oil Pump

Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. 1. Refer to: Specifications (414-01 Battery, Mounting and Ca

© 2011-2025 Copyright www.rrevoque.org