Principle of Operation
For a detailed description of the locks, latches and entry systems and
operation, refer to the relevant Description and
Operation section of the workshop manual REFER to: Handl
Control Diagram
NOTE: A = Hardwired; F = RF transmission; N = Medium speed CAN (controller
area network) bus; O = LIN (local
interconnect network) bus.
Instrument cluster
CJB (central junction bo
Portable media devices can be connected to
the media hub located in the cubby box. The
portable devices that you can connect to the
system include:
- USB mass storage devices (e.g. a memory
stick). Devices must use FAT or FAT32 file
format.
- iPod (iPod Classic, iTouch, iPhone and
Nano are s
For first time programming, ensure that the
engine is switched off:
1. Ensure that the ignition is on (but with the
engine switched off).
2. Press and hold the two outer HomeLink
buttons. Keep the buttons pressed until the
indicator lamp begins to flash (this will take
approximately 20 second