Range Rover Evoque: Door lock and release levers

Door lock and release levers
1. Press a locking lever to lock a door. Pull the
lever back to unlock. Operating either front
door locking levers will lock or unlock all
doors.
2. Pull a release lever to open a front door.
To unlock and open a rear door, first
operate the lock lever, then pull the release
lever.
3. Press the master unlock button to unlock
all doors and tailgate.
4. With all doors closed, press the master
lock button to lock all doors and tailgate.
Note: If the vehicle was locked with the Smart
Key, operating an interior door release lever
will unlock only that door. If the door is opened
the alarm will sound.
Note: If the vehicle has been double locked, the
interior door release levers will not operate.
The vehicle must be unlocked using the Smart
Key.
READ NEXT:
Manual seats
Do not adjust
the seat while the
vehicle is moving. Doing so could
cause loss of vehicle control and
personal injury.
1. Forward and back adjustment.
2. Height adjustment.
3.
Electric seats
1. Lumbar support adjustment.
2. Backrest adjustment.
3. Head restraint adjustment.
4. Height adjustment.
5. Forward and back adjustment.
6. Cushion angle adjustment.
To adjust
SEE MORE:
Removal
NOTES:
The suspension top mount is manufactured from mild steel and RP220.
The service panel is serviced not fully spot welded.
The panel is serviced less its weld studs
1. In this procedure, to make sure the vehicle is correctly aligned, it must
be placed on an
approved alignment jig.
2.
Auto dimming mirror
1. Ambient light sensor.
2. High beam assist sensor.
Interior mirror dimming will adjust
automatically according to the amount of
ambient light when the ignition is on. If reverse
gear is selected, the automatic dimming
feature is turned off to allow maximum
visibility
© 2011-2025 Copyright www.rrevoque.org
