Range Rover Evoque manuals

Range Rover Evoque: Trailer electrical connection

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Towing / Trailer electrical connection

electrical Connect only approved electrical circuits, which are in good condition, to the trailer socket.

The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness kit increasing output to 15 amp is available from your Land Rover Dealer.

When a trailer electrical connection

When a trailer electrical connection is made and the vehicle’s direction indicators are used, the trailer warning indicator will flash in time with the direction indicators.

READ NEXT:

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

 Trailer stability assist (TSA)

When a trailer is attached, TSA will automatically detect when a trailer sway is developing. It will then gradually reduce vehicle speed by cutting engine power and applying the brakes to help reg

SEE MORE:

 Parking Aid Module (PAM)

 CAUTIONS: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle When probing connectors to take measurements in th

 Dynamic stability control (amber)

Dynamic stability control (amber) Illuminates briefly when the ignition is switched on and extinguishes when the engine is started. If the lamp flashes while driving, the DSC system is active. If the lamp illuminates continuously while driving, there is a fault with the DSC system. The vehi

© 2011-2025 Copyright www.rrevoque.org