Range Rover Evoque: Trailer levelling

To maintain vehicle stability, it is essential that the trailer is loaded so that it remains parallel to the ground. This is particularly important when towing twin axled trailers.

Vssential towing checks

READ NEXT:

 Trailer electrical connection

Connect only approved electrical circuits, which are in good condition, to the trailer socket. The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness ki

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

SEE MORE:

 Front Inner Parking Aid Sensor

Removal CAUTION: LH illustration shown, RH is similar. NOTES: Removal steps in this procedure may contain installation details. The ignition must be switched off. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Refer to: Front Bumper Cover (501-19 B

 Anti-Lock Control

Torque Specifications Anti-Lock Brake System (ABS) Module Removal CAUTIONS: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water. Make sure that all openings are sealed. Use new blanking caps. NOTES: Removal steps in this procedure may contai

© 2011-2025 Copyright www.rrevoque.org