Range Rover Evoque: Urban cycle
The urban test cycle is carried out from a cold start and consists of a
series of accelerations,
decelerations and periods of steady speed driving and engine idling. The maximum
speed attained
during the test is 50km/h (30mph) with an average speed of 19km/h (12mph).
READ NEXT:
The extra-urban test cycle is carried out immediately after the urban test.
Approximately half of the
test comprises steady speed driving, while the remainder consists of a series of
acceleration
The combined figure is an average of the urban and extra-urban test cycle
results, which has been
weighted to take account of the different distances covered during the two
tests.
For additional
SEE MORE:
Climate Control
Lubricants, Fluids, Sealers and Adhesives
General Specification
Capacities
Refrigerant oil adding capacities for replacment parts
NOTE: Rotate the A/C compressor shaft at least 6 to 8 turns when draining
the refrigerant oil.
Air Conditioning (A/C)
System Recovery, Evacuation an
Removal
NOTES:
The fender apron lower panel is manufactured from mild steel.
The panel is serviced less its weld studs
This method describes the LH fender apron lower panel, the RH side is similar.
1. The fender apron lower panel is replaced in conjunction with:
Front bumper cover
Front bumper
© 2011-2025 Copyright www.rrevoque.org
