Range Rover Evoque: Window reset

If the battery is disconnected or the power supply is interrupted, the windows must be reset.

Once the power supply is restored, reset as follows: 1. Close the window fully.

2. Release the switch, then lift it to the close position and hold for 1 second.

3. Repeat the procedure on each window.

READ NEXT:

 Anti-trap protection

Closing a window or roof blind onto any part of the body can result in serious injury. Before closing a window or the roof blind, ensure that no occupants have any part of their body in a posi

 Resonance with lowered windows

if a resonance or booming sound occurs when a rear window is open, lowering an adjacent front window by approximately 25mm (1 inch) will eliminate the condition.

 Mirrors

SEE MORE:

  Passenger Seat Cushion Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General In

  Glass, Frames and Mechanisms - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION - DOOR MECHANISMS Passenger door glass motor Passenger door module Rear door glass motor Rear door module Rear fuse box Rear door glass motor Rear door module Driver door glass motor Driver door module CJB (central junction box) COMPONENT LOCATION -

© 2011-2026 Copyright www.rrevoque.org - 0.0048