Range Rover Evoque: Abs warning lamp

briefly when the ignition is turned The ABS warning lamp illuminates briefly when the ignition is turned on.

If this amber warning lamp illuminates when driving (accompanied by an associated warning message), drive with extra caution, avoid heavy braking where possible, and seek qualified assistance as soon as possible.

physical ABS cannot overcome the physical limitations of stopping the vehicle in too short a distance, cornering at too high a speed or the danger of aquaplaning.
Do not take risks that could affect the safety of yourself, your passengers and any other road users. It is the driver’s responsibility to drive within normal safety margins, giving due consideration to prevailing weather and traffic conditions.

READ NEXT:

 Steep slopes

If the vehicle is stationary on a steep, slippery slope, it may begin to slide even with the brakes applied. This is because without wheel rotation, the ABS cannot determine vehicle movement. To

 Emergency brake assist (EBA)

If the driver rapidly applies the brakes, EBA automatically boosts the braking force to its maximum, in order to bring the vehicle to a halt as quickly as possible. If the driver applies the brake

 Electronic brake distribution (EBD)

EBD controls the balance of braking forces supplied to the front and rear wheels, in order to maintain maximum braking efficiency. If the vehicle has a light load (only the driver in the vehicle f

SEE MORE:

 Fuel Tank and Lines - Component Location

Component Location COMPONENT LOCATION - ROW Connection to purge valve Fuel Low Pressure (LP) sensor Fuel fired booster heater - fuel supply pipe connection (if fitted) LP fuel supply pipe Fuel fired booster heater - fuel supply pipe (if fitted) Fuel pump delivery module Fuel tank breather p

 Active On-Demand Coupling Module

Removal NOTE: If a new Active on-demand coupling module is installed, the throttle valve must also be installed. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. 3. CAUTIONS: Make sure that the area around the component is clean and free of foreign m

© 2011-2024 Copyright www.rrevoque.org