Range Rover Evoque: Hill descent control

READ NEXT:

 Hill descent control (HDC) controls

Hill descent control (HDC) controls 1. Press to switch HDC on and off. 2. Press to increase the set speed. 3. Press to decrease the set speed. Manual transmission: HDC can be used in 1st, 2nd o

 Hdc operation

With HDC engaged, standard descent speed will not exceed 20km/h (12.4mph). While the green warning lamp is continuously illuminated, HDC target speed can be modified using the cruise control steer

 Gradient release control (GRC)

With HDC activated, if the vehicle is stopped on a slope using the foot brake, GRC will become active (except in Terrain Response Sand program). It operates in all gears and in neutral position.

SEE MORE:

 Towing a trailer

Never exceed the maximum weights for either the vehicle, or the trailer. Doing so can cause accelerated wear and damage to the vehicle. It can also adversely affect vehicle stability and braking which in turn can lead to loss of control and increased braking distance, resulting in a rollov

 Rear Suspension AWD

Component Location RH (right-hand) spring and damper assembly Stabilizer link Stabilizer bar LH (left-hand) spring and damper assembly Wheel knuckle Hub Longitudinal link Rear transverse link Front transverse link Subframe Overview The rear suspension features long travel McPherson stru

© 2011-2025 Copyright www.rrevoque.org