Range Rover Evoque: Diesel glow plug (amber)

Diesel glow plug (amber)
Illuminates when the ignition is
switched on to indicate that the
glow plugs are active. Wait until
the lamp extinguishes before starting the
engine.
READ NEXT:
External temperature (amber)
Illuminates when the external
temperature is low enough that ice
may be present on the road.
Tyre pressure monitoring (yellow)
Illuminates briefly when the
ignition is switched on. If the lamp
remains on or illuminates while
driving, one or more tyres are significantly
under-inflated.
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e
SEE MORE:
Installation
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. NOTE: This step is only required if previously removed.
Torque: 12 Nm
2. NOTE: This step is only required if previously removed.
3. CAUTION: Make sure that the seal is correctly
Removal
1. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. Refer to: Air Cleaner (303-12, Removal and Installation).
3.
4.
5. CAUTION: Discard the component.
6.
7.
Installation
1. Torque: 25 Nm
2.
3. Torque:
M10 47 Nm
© 2011-2026 Copyright www.rrevoque.org - 0.0039
