Range Rover Evoque: Deselecting valet mode
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Entering the vehicle / Deselecting valet mode
If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen.
Enter your four digit PIN and touch the OK button.
Valet mode is deactivated is displayed.
- The tailgate will return to the previously set security requirement.
- All touch screen functions are enabled.
See 14, SELECTING VALET MODE.
Note: If the PIN number is lost or forgotten, Valet mode can be deactivated only by your Dealer/Authorised Repairer.
READ NEXT:
Operating the tailgate
Ensure there is minimum space
of 1.0M
(39 in) above the rear of vehicle before
operating the tailgate. Insufficient space
may result in damage to the vehicle.
Do not operate the tailgate
if
Powered tailgate operation
1. Press to open the powered tailgate.
2. Press and release to close the powered
tailgate.
After the tailgate has opened to its set height, it
can be manually raised or lowered. If the
tailgate
Powered tailgate opening height
The maximum opening height can be set as
required. This is useful in parking areas with
low ceiling heights or just for ease of use.
1. Open the tailgate to the position which you
want to set as t
SEE MORE:
Transmission Fluid Pan GTDi 2.0L Petrol
Removal
CAUTION: Extreme cleanliness must be exercised when handling this
component.
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Eng
Rear Seat Cushion Cover
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Prior to carrying out the step by step procedure below, Steps 2
and 3 must be followed for knowledge on how to correctly install
and care for the seat cover.
2.
3.
4. If required, follow the steps below to carry out
© 2011-2022 Copyright www.rrevoque.org