Range Rover Evoque: Diesel glow plug (amber)

Diesel glow plug (amber)
Diesel glow plug (amber)

Illuminates when the ignition is switched on to indicate that the glow plugs are active. Wait until the lamp extinguishes before starting the engine.

READ NEXT:

 External temperature (amber)

External temperature (amber) Illuminates when the external temperature is low enough that ice may be present on the road.

 Tyre pressure monitoring (yellow)

Tyre pressure monitoring (yellow) Illuminates briefly when the ignition is switched on. If the lamp remains on or illuminates while driving, one or more tyres are significantly under-inflated.

 Hill descent control (green)

Hill descent control (green) Illuminates when HDC is selected and HDC operating conditions are met. If the lamp flashes, HDC has been selected, but the operating conditions are not being met (e

SEE MORE:

 Engine Cooling - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION Heater core Air Conditioning (A/C) Evaporator (ref only) Heater inlet hose Heater outlet hose/Oil cooler inlet hose Turbocharger water outlet pipe Water outlet Transmission fluid cooler Electric cooling fan - Left Hand (LH) Radiator top hose By-pass

 Rear Bumper Mounting

Removal NOTE: The rear bumper mounting is manufactured from mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The rear bumper mounting is replaced in conjunction with: Rear bumper cover Rear bumper Back panel 3.

© 2011-2025 Copyright www.rrevoque.org