Range Rover Evoque: Hill descent control

READ NEXT:

 Hill descent control (HDC) controls

Hill descent control (HDC) controls 1. Press to switch HDC on and off. 2. Press to increase the set speed. 3. Press to decrease the set speed. Manual transmission: HDC can be used in 1st, 2nd o

 Hdc operation

With HDC engaged, standard descent speed will not exceed 20km/h (12.4mph). While the green warning lamp is continuously illuminated, HDC target speed can be modified using the cruise control steer

 Gradient release control (GRC)

With HDC activated, if the vehicle is stopped on a slope using the foot brake, GRC will become active (except in Terrain Response Sand program). It operates in all gears and in neutral position.

SEE MORE:

 Condenser GTDi 2.0L Petrol

Removal CAUTION: Make sure that all openings are sealed. Use new blanking caps. NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. 1. Disconnect the battery ground cable. Refer t

 Front Inner Quarter Panel

Removal NOTES: The front inner quarter panel is manufactured from mild steel. The front inner quarter panel is to be unpicked from the inner quarter panel, it is not serviced separately. There are NVH components on this panel, they are not serviced on the new panel. If damaged, new components wi

© 2011-2025 Copyright www.rrevoque.org