Range Rover Evoque: Headlamp courtesy delay

This feature operates whenever the lamps master switch is in the AUTO (5) position and the ignition is turned off. The headlamps will remain illuminated for up to 240 seconds.

Note: The time delay may be changed via the Vehicle settings menu. See 56, VEHICLE INFORMATION AND SETTINGS MENU.

Courtesy lamps can be switched off at any time by pressing the headlamps button on the Smart Key.

READ NEXT:

 High beam assist

This feature of the Xenon lighting automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only acti

 Auto lamps windscreen wiper detection

If Auto lamps is selected and the windscreen wipers are switched on for 20 seconds or more, the side lamps, tail lamps and headlamps will switch on automatically. When the wipers are switched off,

 Condensation

Misting of lamp lenses can occur under some atmospheric conditions. This will not affect the performance of the lamps and will clear during normal operation.

SEE MORE:

 Operating the tailgate

Ensure there is minimum space of 1.0M (39 in) above the rear of vehicle before operating the tailgate. Insufficient space may result in damage to the vehicle. Do not operate the tailgate if a cycle rack is fitted to the tailgate. Remove any cycles and/or racks before operating the tailg

 B-Pillar Outer Panel

Removal NOTES: Within this procedure there are 2 different options depending on type of vehicle body. The b-pillar outer panel is manufactured from mild steel. The rocker panel butt joints must be MIG brazed due to the location of boron reinforcements. 1. The B-Pillar outer panel is replaced in

© 2011-2026 Copyright www.rrevoque.org