Range Rover Evoque: Keyless global closing

To initiate global window closing (if enabled), touch and hold the lock sensor (1) for 3 seconds. This will also single lock the vehicle and activate the alarm.

Note: The windows will close only while the sensor (1) is covered. To fully secure the vehicle, continue to touch the sensor until all windows are fully closed.

READ NEXT:

 Drive-away locking

Drive-away locking automatically locks all doors at a set speed when the vehicle is in motion. This feature can be enabled/disabled via Drive-away locking in the Vehicle Settings menu. See 56, VEH

 Selecting valet mode

Valet mode allows the vehicle to be driven, e.g., by a parking attendant, but leaves the tailgate locked and restricts use of the touch screen. This prevents access to telephone numbers, navigatio

 Interior protection

The interior protection feature of the full alarm system may be temporarily disabled via Alarm sensors in the Vehicle Settings menu. See 56, VEHICLE INFORMATION AND SETTINGS MENU. Note: If the in

SEE MORE:

 Anti-Theft - Passive

Anti-Theft - Passive - Component Location COMPONENT LOCATION Instrument cluster Start/stop button Radio Frequency (RF) receiver Interior antennas Keyless Vehicle Module (KVM) Immobilizer Antenna Unit (IAU) Electric steering column lock BJB (battery junction box) Battery CJB (central junc

 Front Bumper Mounting

Removal NOTE: The front bumper mounting is manufactured from HSLA300 and mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The front bumper mounting is replaced in conjunction with: Front bumper cover Front bumper

© 2011-2025 Copyright www.rrevoque.org