Range Rover Evoque: Memory seats

Front seat positions can be saved to vehicle memory.

Once you have adjusted the power operated driver’s seat and the exterior mirrors, the vehicle can memorise the settings for future use. See 48, EXTERIOR MIRRORS.

1. On the driver’s seat, press the memory

1. On the driver’s seat, press the memory store button to activate the memory function. The switch indicator will illuminate.

2. Press one of the preset buttons within 5 seconds to memorise the current settings.

Memory (1, 2 or 3) Settings Saved will be displayed on the message centre, accompanied by an audible chime to confirm the settings have been saved to memory.

Note: A seat position will be saved to memory only during the 5 second active period.

Note: Any existing settings will be over-written when a new position is saved to memory.

To recall a saved position, press the relevant preset button (2). Memory (1, 2 or 3) Recalled will be displayed in the message centre.

For the passenger seat of a Coupe model, press the memory button to store the current settings. If the seat adjustment is subsequently changed, press the memory button to restore the original settings.

READ NEXT:

 Easy entry/exit

When Easy entry/exit is configured, the driver’s seat will automatically lower when the ignition is switched off and the door release lever is used. Upon returning to the vehicle, when the drive

 Head restraints

Adjust the head restraint so that the top of the head restraint is above the centre line of the head. An incorrectly adjusted head restraint increases the risk of death or serious injury in the

 Integrated head restraints

Models with ‘sports’ seats have non adjustable and non removable head restraints.

SEE MORE:

 Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate. 2. Press a release switch. 3. Allow the tailgate to power fully open or to the pre

 Power Brake Actuation

Brake Booster - Component Location COMPONENT LOCATION - 2.2L Td4 NOTE: RHD (right-hand drive) installation shown, LHD (left-hand drive) installation similar Brake booster Vacuum pipe (vehicles with stop/start system) Vacuum pump Vacuum pipe (vehicles without stop/start system) Non return val

© 2011-2021 Copyright www.rrevoque.org