Range Rover Evoque: Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate.

2. Press a release switch.

3. Allow the tailgate to power fully open or to the previously set position.

4. Press and release the close switch.

5. Allow the tailgate to power close fully.

The tailgate programmed position memory will now be restored.

READ NEXT:

 Changing the smart key batttery

When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message centre. To renew the battery:

 Exiting the vehicle

 Locking and arming the alarm

CAUTION: No modifications or additions should be made to the anti-theft system. Such changes could cause the system to malfunction. There are two levels of security: - Single locking. With all d

SEE MORE:

 Side Panel

Removal NOTES: The side panel is manufactured from mild steel. The fender mounting bracket is serviced on the new panel. This procedure identifies the method for the replacement of the side panel in full. There are possible alternative sections of the side panel that can be performed dependant on

 Driver/Passenger Door Module (DDM/PDM)

 CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle  NOTES: If the control module or a component

© 2011-2021 Copyright www.rrevoque.org