Range Rover Evoque: Repairing minor paint damage
Regularly inspect the paintwork for damage.
Any stone chips, fractures, or deep scratches,
in the paint/bodywork should be repaired
promptly. Bare metal will corrode quickly, and
if left untreated can result in expensive repairs.
READ NEXT:
Some cleaning products
contain
substances that are harmful and can
cause health problems if used
incorrectly and may cause damage to
the vehicle interior. Ensure that you
read the manufacturer
Never use soap, ammonia,
bleach or
other cleaners intended for use on hard
surfaces.
Dynamica suede fabric should be cleaned
regularly. Do not rub vigorously and do not use
a steam machine. Du
Use only cleaning products
specifically
designed for use on leather. Do not use
solvents. Do not use chemical, alcohol,
or abrasive materials, as they will cause
rapid deterioration of the leat
SEE MORE:
Removal
NOTES:
The fender apron lower panel is manufactured from mild steel.
The panel is serviced less its weld studs
This method describes the LH fender apron lower panel, the RH side is similar.
1. The fender apron lower panel is replaced in conjunction with:
Front bumper cover
Front bumper
Special Tool(s)
303-1390A
CKP Sensor Alignment Tool
JLR-303-1595
Alignment Tool, Crankshaft Damper
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Wheel and Tire
© 2011-2026 Copyright www.rrevoque.org
