Range Rover Evoque: System
- Button feedback: Soft key confirmation tone on or off.
- Clock adjust: Select 12 or 24 hour clock.
Set current time. Select Date to change the date, or to alter the date format.
Select Set, to store new settings.
Note: The clock can also be adjusted from the touch screen time display.
- Home menu shortcuts: Select up to three items from the displayed list to appear as shortcuts on the Home Menu.
Select Clear to deselect highlighted items.
- Language: Select the required language.
Select Male or Female voice. Touch Change to select alternatives for Voice and text displays. Follow the on-screen instructions to confirm.
Note: Some languages are not yet available for both System display text and Voice control. In this event, it will be necessary to select a separate language for Voice control.
- Volume presets: Adjust volume for the available systems (announcements, parking aid, phone, voice etc.).
READ NEXT:
Voice
- Command list: View the categories and the
acceptable voice commands.
Select an Information button to view
alternative function commands.
- Voicetags: View the categories. Select a
category to m
Valet
Selection:
Valet mode allows the vehicle to be driven and
locked by a parking attendant, without giving
access to the luggage compartment. Valet
mode also prevents operation of the touch
screen,
Extra features
There are more features available than can be
displayed at one time. This menu allows the
selected features to be displayed, for example:
- Ambient lighting: While the headlamps are
turned on, sel
SEE MORE:
Instrument Panel Upper Section
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. Make the SRS system safe.
Refer to: Standard Workshop Practices (100-00 General Information,
De
Lifting
Two-Post Lift
WARNING:
Make sure that the vehicle is stable before commencing work.
CAUTION: If
the drive shaft(s) are to be removed, release the parking brake and select
NEUTRAL 'N' in the
transmission in order that the shaft(s) can be rotated when the vehicle is
raised to the desired height.
