Range Rover Evoque: Heating and ventilation
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Heating and ventilation
- Heating and ventilation controls
- Auto mode
- Temperature controls
- Maximum defrost
- Air distribution control
- Heated screens
- Front seat heaters
- Recirculation
- Recirculation with pollution and humidity sensing
- Water deposits
- Heated mirrors
- Timed climate
- Auxiliary heater
- Timed climate remote control
- Replacing remote control batteries
- Additional remote controls
READ NEXT:
Heating and ventilation controls
Controls
1. Temperature controls. For individual
driver/passenger settings.
2. Maximum defrost program.
3. Air distribution.
Note: More than one setting may be
selected at a time to achieve th
Auto mode
AUTO mode should be used as the normal
operating mode. The air conditioning, heating
and ventilation controls automatically provide
an optimum environment at the selected
temperature.
To resume f
Temperature controls
Rotate to set a temperature.
Note: The maximum possible temperature
differential between the driver and passenger
settings is 4°C (7°F).
SEE MORE:
Rear Lamp Mounting Panel
Removal
NOTES:
The rear lamp mounting panel is manufactured from mild steel.
The section of the rear lamp mounting panel described within this procedure is
for the access for installation of the
inner back panel assembly.
The upper NVH component must be replaced when a complete panel is installed
Active On-Demand Coupling Module
Removal
NOTE: If a new Active on-demand coupling module is installed, the throttle
valve must also be installed.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2.
3. CAUTIONS:
Make sure that the area around the component is
clean and free of foreign m
© 2011-2025 Copyright www.rrevoque.org
