Range Rover Evoque: Module Communications Network

READ NEXT:

 Central Junction Box (CJB)

Removal CAUTIONS: If a new component is to be installed, the Land Rover approved diagnostic equipment must be connected prior to removal, the data must then be downloaded from it and the keys (remote

 Battery Junction Box (BJB) TD4 2.2L Diesel

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. All vehicles 1. Refer

 Battery Junction Box (BJB) GTDi 2.0L

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. All vehicles 1. Refer

SEE MORE:

 Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate. 2. Press a release switch. 3. Allow the tailgate to power fully open or to the pre

 Fender Apron Panel Reinforcement

Removal NOTE: The fender apron panel reinforcement is manufactured from mild steel. 1. 2. For additional information relating to this repair procedure please see the following: For additional information, refer to: Health and Safety Precautions (100-00 General Information, Description and Operat

© 2011-2026 Copyright www.rrevoque.org