Range Rover Evoque: Electric windows and panoramic roof blind

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Windows / Electric windows and panoramic roof blind

Electric windows and panoramic roof blind
Electric windows and panoramic roof blind

1. Briefly pull a switch fully up and release, the window will continue to rise until fully closed. Briefly press a switch fully down and release, the window will continue to lower until fully open. Pressing or pulling a switch again will stop the window.

The windows will operate for 5 minutes after the engine is switched off, as long as none of the doors are opened.

Rear windows have a short drop feature for passenger comfort. The first press of a switch will lower the window a short distance to give a flow of air. A second press will lower the window to its full extent.

Note: Coupe models have fixed rear windows and a different switch pack.

2. Rear window isolator switch.

The rear windows are isolated when the indicator light in the switch is illuminated.

the rear If children are carried in the rear seats, the isolator switch should be used to prevent operation of the windows. If the windows are operated by young children there is a risk of serious injury or death.

3. Roof blind open/close switch: To open the blind: Push from the rear of the switch and release. The blind will slide fully open.

To close the blind: Push from the front of the switch to the first position and release.

The blind will fully close.

A further press will stop movement of the blind.

Alternatively, push from the front of the switch to the second position and hold until the blind reaches the desired position, then release.

READ NEXT:

 Window reset

If the battery is disconnected or the power supply is interrupted, the windows must be reset. Once the power supply is restored, reset as follows: 1. Close the window fully. 2. Release the switc

 Anti-trap protection

Closing a window or roof blind onto any part of the body can result in serious injury. Before closing a window or the roof blind, ensure that no occupants have any part of their body in a posi

 Resonance with lowered windows

if a resonance or booming sound occurs when a rear window is open, lowering an adjacent front window by approximately 25mm (1 inch) will eliminate the condition.

SEE MORE:

 Rear Side Member Closing Panel

Removal NOTES: The rear side member lower side extension is manufactured from DP600 with a mild steel mounting bracket. The panel is serviced less its weld studs. 1. The rear side member closing panel is replaced 2. For additional information relating to this repair procedure please see the foll

 Voice

- Command list: View the categories and the acceptable voice commands. Select an Information button to view alternative function commands. - Voicetags: View the categories. Select a category to manage the voicetags for the chosen system. See 140, VOICETAGS. - Operating guide: View brief Voice

© 2011-2021 Copyright www.rrevoque.org