Range Rover Evoque: Wheel changing

READ NEXT:

 Changing a road wheel

Changing a road wheel 1. Temporary spare wheel locking ring. 2. Temporary spare wheel retaining bolt. 3. Tool kit retaining bolt. 4. Jack. 5. Wheel brace. After use, the tool kit should be

 Removing the temporary spare wheel

Remove the spare wheel prior to jacking the vehicle, to avoid destabilising the vehicle when raised. Do not use power tools to loosen the spare wheel. Doing so may damage the mechanism. 1.

 Temporary spare wheel

Always adhere to the instructions given on the temporary use spare wheel warning label. Failure to comply can be dangerous. When a temporary use spare wheel is fitted, drive with caution and r

SEE MORE:

 Headlamps

Moving the nearside headlamp unit to access bulbs; 1. Remove the two plastic fixings. 2. Pull the tube up to release from the air box. This will allow more room for manoeuvrability. 3. Remove the four grille fixings. 4. Remove the two retaining bolts. 5. At the rear of the headlamp unit, p

 Electric Power Assisted Steering Module (EPAS)

Steering Gear (PSCM)  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.  NOTES: If the control

© 2011-2025 Copyright www.rrevoque.org