Range Rover Evoque: Epb warning indicators

If the system detects a fault with the EPB, the amber brake warning indicator will illuminate accompanied by a message on the message centre.

If the system detects a fault while EPB is operating, the red brake warning indicator will flash and a PARKBRAKE FAULT message will display in the message centre.

Note: The red brake warning indicator will continue to be illuminated for at least ten seconds after the ignition has been turned off.

READ NEXT:

 Cruise control

 Using cruise control

Using cruise control 1. Set target speed, or increase speed. 2. RES. Resume set speed. 3. CAN. Suspends cruise control operation without erasing memorised speed. 4. Decrease set speed. Note: C

 Set or increase cruise speed

When setting the cruise control to the speed limit, it is important to remember that it is possible for the vehicle speed to increase when travelling downhill. This may result in the vehicle sp

SEE MORE:

  Control Components - Component Location

Component Location COMPONENT LOCATION (GTDI) Refrigerant pressure sensor Cabin humidity sensor (if fitted) A/C (air conditioning) compressor ECT (engine coolant temperature) sensor Ambient air temperature sensor Air intake stepper motor Pollution sensor Windshield distribution (defrost) st

  Control Diagram, System Operation

Control Diagram NOTE: A = Hardwired; D = High Speed CAN (controller area network) bus; N = Medium Speed CAN bus; O = LIN (local interconnect network) bus DW12C is shown, GTDi is similar Battery Blower motor LH (left-hand) temperature blend stepper motor Windshield distribution (defrost) stepp

© 2011-2026 Copyright www.rrevoque.org - 0.0037