Range Rover Evoque: Exterior Lighting

READ NEXT:

 Exterior Lighting - Component Location

COMPONENT LOCATION Instrument cluster Hazard flasher switch Rain/Light sensor Rear height sensor (Xenon headlamps only) Side turn signal indicator lamp Headlamp leveling control module CJB (c

 Exterior Lighting - System Operation and Component Description

 Control Diagram, System Operation

Control Diagram NOTE: A = Hardwired; D = High speed CAN (controller area network) bus; O = LIN (local interconnect network) bus Battery BJB (battery junction box) Front height sensor Rear heigh

SEE MORE:

 Headlamp Leveling Control Module (HLCM)

Headlamp Control Module (HCM)  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle  NOTES: If the

 Central Junction Box (CJB)

Removal CAUTIONS: If a new component is to be installed, the Land Rover approved diagnostic equipment must be connected prior to removal, the data must then be downloaded from it and the keys (remote control handsets) set into default mode. Failure to follow this instruction will result in permane

© 2011-2025 Copyright www.rrevoque.org