Range Rover Evoque: Screen modes
Touch the screen mode selection button (12)
to view a series of icons, each depicting a
different screen mode (as detailed below).
Touch the relevant icon to select the desired
screen mode.
![Full screen view.](images/books/2524/2/index.138.gif)
Full screen view.
![Split screen view. A more detailed](images/books/2524/2/index.139.gif)
Split screen view. A more detailed
view of the local area and road
system is displayed on the right.
![Shows the next junction in the](images/books/2524/2/index.140.gif)
Shows the next junction in the
right half screen.
![This view is only available when](images/books/2524/2/index.141.gif)
This view is only available when
travelling on a motorway. It
displays automatically to show
remaining exits along your route.
![Shows list of forthcoming](images/books/2524/2/index.142.gif)
Shows list of forthcoming
junctions and turn directions on
the right half screen.
READ NEXT:
The navigation map database is divided into
countries, or geographically defined areas
within countries, called search areas. When
setting a route, the destination (or waypoint)
entered must be in
After touching Agree, the initial map screen is
displayed, now select Nav Menu.
From the Navigation Menu, select Destination
entry.
Select Address from the Destination screen
and input the town n
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
SEE MORE:
Removal
NOTES:
The B-Pillar reinforcement is manufactured from boron steel.
The B-Pillar reinforcement is unpicked from the side panel reinforcement,
'ring-frame', it is not serviced separately.
There are 2 NVH components serviced on the new B-Pillar reinforcement.
1. The B-Pillar reinforcement i
Moving the nearside headlamp unit to access
bulbs;
1. Remove the two plastic fixings.
2. Pull the tube up to release from the air box.
This will allow more room for
manoeuvrability.
3. Remove the four grille fixings.
4. Remove the two retaining bolts.
5. At the rear of the headlamp unit, p
© 2011-2024 Copyright www.rrevoque.org
![](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAEALAAAAAABAAEAAAIBTAA7)