Range Rover Evoque: Dynamic
This special program is associated with a driving style rather than a type of terrain. Choose this program for exploiting the vehicle's full on-road potential, providing a more focussed and involved driving experience.
When selected, this program optimises handling and driveability characteristics for maximum feedback and responsiveness.
READ NEXT:
General program (special programs off)
This program is compatible with all
on and off-road conditions. If not
already active, it should be selected
before driving on surfaces which are similar to
a hard road surface. Dry cobbles, tar
Grass-gravel-snow
This program should be used
where a firm surface is covered
with loose or slippery material.
Note: For deep snow it is recommended that
the Sand program is selected.
Note: If the vehicle is una
Mud-ruts
This program should be used for
crossing terrain that is muddy,
rutted, soft or uneven. HDC is
automatically selected with this program.
SEE MORE:
Differential Support Insulator
Removal
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Support the rear differential using a transmission jack.
3. CAUTION: Mark the components to aid
installation.
Discard the bolts.
4.
Installation
1. Torque: 35 Nm
2. CAUTIONS:
Make sure that
Rolling code device equipment programming
Note: The assistance of a second person, may
make the following steps quicker and easier.
Once the button has been pressed there are
only 30 seconds in which to complete Step 3.
1. At the garage door opener receiver (motor
head unit) in the garage, locate the learn or
smart button/switch.
- T
© 2011-2025 Copyright www.rrevoque.org
