Range Rover Evoque: Starting the engine
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Starting the engine
- Switching on the ignition
- Engine starting
- Engine starting: automatic transmission
- Engine starting: manual transmission
- If the engine fails to start
- Switching off the engine
- Switching off the engine with the vehicle moving
- Rolling re-start
- Keyless start backup
- Stop/start (manual transmission only)
- Conditions preventing automatic engine stop
- Conditions causing automatic engine restart
- Disabling stop/start
- Eco stall recovery
- Emission control system
- Diesel particulate filter (DPF)
READ NEXT:
Switching on the ignition
To turn on the ignition without starting the
engine:
- Do not depress the brake/clutch pedal,
- Press the START/STOP button and hold
until the warning lamps illuminate, then
release the button.
Engine starting
Never start the engine, or
leave it
running, when the vehicle is in an
enclosed space. Exhaust gasses are
poisonous and can cause
unconsciousness and death if inhaled.
If the engine fails to
Engine starting: automatic transmission
1. A valid Smart Key must be inside the
vehicle.
2. Make sure the gear selector is in P or N.
3. Firmly depress the brake pedal.
4. Press and release the start button. The
engine will crank autom
SEE MORE:
Quarter Panel
Removal
NOTES:
Within this procedure there are 2 different options depending on type of
vehicle body and combination of replacement panels.
The quarter panel is manufactured from mild steel.
The rocker panel butt joint in option 2 must be MIG brazed due to the location
of boron reinforcements.
Control Diagram, System Operation
Control Diagram
NOTE: A = Hardwired; F = RF transmission; N = Medium speed CAN (controller
area network) bus; O = LIN (local
interconnect network) bus.
Instrument cluster
CJB (central junction box)
Radio frequency (RF) receiver
RFA (remote function actuator) / KVM (keyless vehicle module)
Re
© 2011-2025 Copyright www.rrevoque.org
