Range Rover Evoque: Starting the engine
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Starting the engine
- Switching on the ignition
- Engine starting
- Engine starting: automatic transmission
- Engine starting: manual transmission
- If the engine fails to start
- Switching off the engine
- Switching off the engine with the vehicle moving
- Rolling re-start
- Keyless start backup
- Stop/start (manual transmission only)
- Conditions preventing automatic engine stop
- Conditions causing automatic engine restart
- Disabling stop/start
- Eco stall recovery
- Emission control system
- Diesel particulate filter (DPF)
READ NEXT:
Switching on the ignition
To turn on the ignition without starting the
engine:
- Do not depress the brake/clutch pedal,
- Press the START/STOP button and hold
until the warning lamps illuminate, then
release the button.
Engine starting
Never start the engine, or
leave it
running, when the vehicle is in an
enclosed space. Exhaust gasses are
poisonous and can cause
unconsciousness and death if inhaled.
If the engine fails to
Engine starting: automatic transmission
1. A valid Smart Key must be inside the
vehicle.
2. Make sure the gear selector is in P or N.
3. Firmly depress the brake pedal.
4. Press and release the start button. The
engine will crank autom
SEE MORE:
Surround camera system
The camera home page is accessed from the
Home menu screen. If Cameras has not been
set as a short cut, touch Extra features to
display the list.
With the engine running, the surround camera
system uses 5 discretely placed cameras to
assist in manoeuvring the vehicle.
1. Enlarge:
To enlarg
Dsc warning lamp
The amber DSC warning lamp in
the instrument panel illuminates
briefly when the ignition is
switched on and extinguishes when the engine
is started.
If the lamp flashes while driving, the DSC
system is active. If the lamp illuminates
continuously while driving, there is a fault with
the DS
© 2011-2025 Copyright www.rrevoque.org
