Range Rover Evoque: Starting the engine
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Starting the engine
- Switching on the ignition
- Engine starting
- Engine starting: automatic transmission
- Engine starting: manual transmission
- If the engine fails to start
- Switching off the engine
- Switching off the engine with the vehicle moving
- Rolling re-start
- Keyless start backup
- Stop/start (manual transmission only)
- Conditions preventing automatic engine stop
- Conditions causing automatic engine restart
- Disabling stop/start
- Eco stall recovery
- Emission control system
- Diesel particulate filter (DPF)
READ NEXT:
Switching on the ignition
To turn on the ignition without starting the
engine:
- Do not depress the brake/clutch pedal,
- Press the START/STOP button and hold
until the warning lamps illuminate, then
release the button.
Engine starting
Never start the engine, or
leave it
running, when the vehicle is in an
enclosed space. Exhaust gasses are
poisonous and can cause
unconsciousness and death if inhaled.
If the engine fails to
Engine starting: automatic transmission
1. A valid Smart Key must be inside the
vehicle.
2. Make sure the gear selector is in P or N.
3. Firmly depress the brake pedal.
4. Press and release the start button. The
engine will crank autom
SEE MORE:
Control Diagram
NOTES:
A = Hardwired; N = Medium Speed CAN (controller area network) bus; D =
High Speed CAN bus; T = Coaxial; O =
LIN (local interconnect network) bus; P = Fibre Optic MOST; AD = NSTC; AE = LVDS;
Park assist is not available to all markets.
CONTROL DIAGRAM - SHEET 1 OF 3 - PARKING AID AND PARK ASS
Abs warning lamp
The ABS warning lamp illuminates
briefly when the ignition is turned
on.
If this amber warning lamp illuminates when
driving (accompanied by an associated
warning message), drive with extra caution,
avoid heavy braking where possible, and seek
qualified assistance as soon as possible.
ABS
© 2011-2025 Copyright www.rrevoque.org
