Range Rover Evoque: Electrical Distribution & Electronic Feature Group

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Electrical Distribution & Electronic Feature Group

READ NEXT:

 Module Communications Network

 Central Junction Box (CJB)

Removal CAUTIONS: If a new component is to be installed, the Land Rover approved diagnostic equipment must be connected prior to removal, the data must then be downloaded from it and the keys (remote

 Battery Junction Box (BJB) TD4 2.2L Diesel

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. All vehicles 1. Refer

SEE MORE:

 Pipes and Hoses

When removing or installing flexible hydraulic pipes and hoses, make sure that the following procedures are observed to make sure component serviceability: Prior to removal, clean area around hose or pipe end which is to be disconnected. Obtain appropriate blanking plugs or caps before disconn

 Emergency brake assist (EBA)

If the driver rapidly applies the brakes, EBA automatically boosts the braking force to its maximum, in order to bring the vehicle to a halt as quickly as possible. If the driver applies the brakes slowly, but conditions mean that ABS operates on the front wheels, EBA will increase the braking

© 2011-2025 Copyright www.rrevoque.org